Vertical Stabiliser 06-02 to 06-03 – Construction begins

Plucked up courage and started! So far so good, gradually building experience with the different tools. Used the bandsaw to quickly trim the VS-01401 and Front Spar … I can see this tool is going to be very useful.


Rear spar clecoed

EdmT13agQbVe0n1THdGlw.jpg


Pillar Drill

9zhBK0pSQdaL0hcSNuJ%pg

Since the doubler is quite thick I decided to use the pillar drill to final drill the holes to ensure a perpendicular hole. Didn’t take too long once I’d worked out how to support the spar whilst clearing the clecos.


Structure Clecoed

lIv0TlQZReOOdcOqfEo%gg

It is becoming rapidly evident that the parts fit superbly in this kit, as everyone has been telling me.

Be the first to comment on "Vertical Stabiliser 06-02 to 06-03 – Construction begins"

Leave a comment

Your email address will not be published.


*