19 – Wing Wiring Part 2 – Lighting Harnesses
Having come up with an overall plan for the wing wiring, I decided to produce wiring diagrams detailing the wire sizes and connector pins to make it easier whilst making the harnesses. They will also…
Having come up with an overall plan for the wing wiring, I decided to produce wiring diagrams detailing the wire sizes and connector pins to make it easier whilst making the harnesses. They will also…
I wanted to do the Aileron Trim work prior to attaching the bottom wing skin. A few parts to deburr … oooh, goodie! I’ve been missing it! Having chosen an access plate, & once positioned,…
I nipped up the jam nuts on one end of the pushrods, and then adjusted the other end so that the overall length was as specified in the manual, leaving that end un-torqued for the…
Some of the rivet callouts in 20-03 Fig 3 are a bit suspect. eg It suggests you machine countersink the ADAHRS retainers, which are far too thin! I couldn’t see a good reason to use…
This section of the manual is all about installing the wing wiring and Pitot/AOA tubes. So, lots of design decisions have had to be made! When at Oshkosh last year I very much admired Rick…