Avionics – Box Installation
Avionics Bay Supports I made the supports from 1″x1/2″x1/8″ aluminium angle, spacing them to match the hole span on the GEA 24. I match drilled two holes in each bracket for 1/8″ rivets. Having clecoed…
Avionics Bay Supports I made the supports from 1″x1/2″x1/8″ aluminium angle, spacing them to match the hole span on the GEA 24. I match drilled two holes in each bracket for 1/8″ rivets. Having clecoed…
Well here’s the plan for the GTX 45R Transponder location. I want to keep it as far forward as possible, to allow room for any required switches underneath the right G3X screen. The unit slides…
Equipment Eventually it is time for all those vague plans and dreams over the last few years to be made real … and this means decisions have to be made so that installation can be…
I’ve spent a lot of time over the last weeks making decisions on the Avionics, and attempting to plan the installation of the components. To offset the feeling that productivity was flagging, I decided to…