Wiring – Op 55 Fuselage Harness
The work described in this post covers the wiring harness installation described in OP-55 in the build manual. Those following along with this build will know that I have decided to install wiring as recommended…
The work described in this post covers the wiring harness installation described in OP-55 in the build manual. Those following along with this build will know that I have decided to install wiring as recommended…
Starting to get more complicated now, so another diagram definitely needed. Having fitted a GMU 11 Magnetometer, changes to the Van’s (Stein) harness have to be made, since the CanBus now has to route to…
Once the avionics boxes were installed, it was time to focus on wiring the aeroplane. Since I’d decided to wire the lighting as per AeroLED’s advice, and also the servos as per Garmin best practice,…