Priming Rudder Parts

Preparation for priming … scuffing lightly with maroon Scotchbrite, then cleaning and degreasing with Acetone. I’m using  a CERTEK™ Non-Linting wiping roll, which is a clean lint free wiping product that will not tear or shred fibre….

Jointing Compound?

Another major decision is whether to use jointing compound or not. Again lots of different opinions. And of course one very important opinion to take note of is that of your inspector! And mine is…

Spray Booth

Built a 3m x 3m spray booth out of 44mm x 44mm PSE Pine, and covered it with heavy duty plastic sheet. The aim is to prevent overspray covering the workshop!