20-04 Riveting Lower Wing Skins
My rivet partner Tim had a week off, so this was an ideal opportunity to offer him a fun-filled few days of concentrated riveting : ) We decided to get the job done with the…
Read MoreSection 20 – Bottom Wing Skins
20-03 to 04 Assembling ADHARS Mount
Some of the rivet callouts in 20-03 Fig 3 are a bit suspect. eg It suggests you machine countersink the ADAHRS retainers, which are far too thin! I couldn’t see a good reason to use…
20-03 & 05-06 ADAHRS Mounting & Lower Skin Preparation
The main thing to consider when deciding a location for the magnetometer is unwanted magnetic interference, both from electrical sources and the airframe. Options include the right wingtip, which keeps the unit away from the…
20-02 Flap & Aileron Gap Fairings
It was going to be a few days before Tim was available to help with more Proseal fun on the Right Tank, so I decided to leap ahead to Section 20 and get the Flap…