19-04 Pitot Tube Installation Completed
Now that the Left Wing Outer Lower Skin is riveted in place, it was time to see if the pitot tube bends resulted in the P-Clamp hole lining up with the rib hole … happy…
Now that the Left Wing Outer Lower Skin is riveted in place, it was time to see if the pitot tube bends resulted in the P-Clamp hole lining up with the rib hole … happy…
This wiring was my first exposure to DSub Pins : ) Again, lots of advice on the web, the most useful I found being on the EAA site (Circular Plastic Connectors) and SteinAir. I had…
Having come up with an overall plan for the wing wiring, I decided to produce wiring diagrams detailing the wire sizes and connector pins to make it easier whilst making the harnesses. They will also…
This section of the manual is all about installing the wing wiring and Pitot/AOA tubes. So, lots of design decisions have had to be made! When at Oshkosh last year I very much admired Rick…
It’s been a while since I’ve penned an update on the build progress … I’ve been distracted by a major decision … I’ve just retired! I’ve had a wonderful, rewarding and privileged aviation career, both…