36-13 to 16 Elevator and Joystick Stops
The control column stops needed a small adjustment to achieve the stick travel specified. A bit hard to access, and it took a while due to the iterative process. I found it easiest with a…
The control column stops needed a small adjustment to achieve the stick travel specified. A bit hard to access, and it took a while due to the iterative process. I found it easiest with a…
I took care to adjust the pushrod lengths as close to the manual specs as possible. Having nipped up the lock nuts on one end, I then started connecting it all together so as to…
It’s actually early April as I write this, although the eagle eyed will spot that the date on the entry is mid March. This is because I date the entries to match when the work…
Here’s the Yaw servo mount riveted together ready for fitting in the Aft Fuselage. But first I need the Elevator Bellcrank Mount … Squeezed the rivets on the Elevator Bellcrank Assembly. The F-1037A Bellcrank Angles…
Brace I moved on preparing the remaining parts required before the fuselage join. The F-01457 Gussets are clamped in position so the Upper Longerons can be match drilled. Bulkhead Bar Assemblies I re-installed the Bulkhead…