G STRV-banner%20-%20small

OP 52A – Landing Light Installation


I spent a pleasant afternoon spent assembling the previously prepared parts whilst installing the AeroLED Sunspot Landing Lights.


The manual asks you to prepare spacers 10mm long, which I had done.

When I nipped up the bolts against the spacers, I found the light could still rotate easily in the assembly.

So I filed the spacers down to a 9.5mm length and tried again … now it clamped the lights properly.


I positioned the lights so that the terminals were orientated to easily attach the wires, but also look right from outside with respect to the LED layout.


I couldn’t resist a little test to see if my wiring worked, so fired up my old 13.8 volt power supply …


… connecting it to the relevant pins at the wing root …

… hey presto! : )


Leave a Reply

Your email address will not be published. Required fields are marked *